Key
Description
GS
Applicable when using SmartPole. To enter the Measure
panel and measure a point with GS. The antenna height is
automatically converted from the target height.
Done
For
Resection
only. To exit the Setup app temporarily. The
setup is incomplete but can be continued later. This softkey
changes to
Calculate
when sufficient data is available.
Calculate
For
Multiple backsights
:
Available after the first measurement. You can see the calcu-
lated setup orientation and other results.
For
Resection
:
Available after measuring two target points or as soon as a
preliminary setup and orientation can be calculated. The cal-
culated setup coordinates and overall “quality” of the results
are displayed.
For
Orientate to object
:
Available after measuring three or more target points. The
calculated setup coordinates and overall “quality” of the
results are displayed.
Fn
Find
Stakeout values are provided to guide the prism holder to
the selected target point.
For
Resection
and
Orientate to object
, this key becomes
available once sufficient data is available for calculation.
Refer to "50.8 Finding a Target Point".
Fn
Position
To position the instrument to the selected target point.
For
Resection
:
Available once sufficient data is available for calculation.
Description of fields
Field
Option
Description
Point ID
Selectable list The point ID of the target point to be meas-
ured.
Target
height
Editable field
The height of the target above or below the
backsight point. The last setup target height
is always remembered.
Angle right
Display only
Available when
Hz angle display
:
Angle
right
is configured in
Regional
,
Angle
page.
Displays the horizontal angle difference
between the backsight point and the current
telescope position.
V angle
Display only
The current vertical angle.
Slope dis-
tance
Display only
The measured slope distance after
Distance
was pressed.
Difference
in horizon-
tal distance
Display only
The difference between the calculated and
the measured horizontal distance.
Difference
in height
Display only
The difference between the given and the
measured height of the target point.
884
Setup - TS
Содержание Captivate
