Refer to "51.4 Staking Out" for a description of the standard keys.
Key
Description
Last
To set the
Slope to point
to the last staked point.
Description of fields
Field
Option
Description
Azimuth
Editable field
Direction from the current preplot point for
which the
In-line
and
Cross-line
offsets are
computed.
This azimuth value is automatically updated
each time the selected preplot point changes
in the 3D viewer.
If the
Use track number optimization
is
checked in the
Define Line Settings
panel,
then the computed azimuth is the one from
the first to the last point of the track.
If the
Use track number optimization
is
not checked in the
Define Line Settings
panel, then the computed azimuth is based
on the next preplot point in the list. If no
next point is available, then the azimuth is
from the previous point to current one.
For specific validation, enter an azimuth
value.
In-line
Display only
Measured position in/out offset based on the
line from the current preplot point to the
given azimuth direction. Negative value is in.
Seismic Stakeout,
page
Seismic Stakeout
917
Содержание Captivate
