Leica Captivate, Техническое справочное руководство

Страница: 746 / 1060

Field Option Description
Reference
line
Left line or
Right line
To select one of the lines to be used as the
reference line.
Show infor-
mation to
an addi-
tional line
Check box When this box is checked, a second line can
be selected.
Allows chainage, offset and height difference
information to be obtained from any other
string of the layer independent from those
strings currently used. For example: Staking a
surface grade where the height information
comes from the surface grade but the chain-
age information comes from a string which is
not the centreline of the current layer.
Additional
line
Selectable list The lines available as second lines.
For Stake : Layer
Field Option Description
Layer Selectable list A list of all available layers of the selected
Road job.
Centreline Display only Active centreline of the selected layer.
Extend end
slopes
Check box When this box is checked, the left most and
right most end slopes of the design are
extended.
For Stake : DTM , available for Check road
Field Option Description
DTM layer Display only A list of all DTM surfaces available in the
selected DTM job.
Number of
triangles
Display only Number of triangles the selected DTM con-
sists of.
Next step
OK
to access the Stake or Check panel.
45.2.2 Selecting a Line
In the Define panel, open a selectable list for a line, for example for Working
line or Left line .
The selection of lines depends on:
•
Availability of horizontal alignments
•
Availability of vertical alignment information
•
View (plan or cross section view)
•
Working chainage defined or not
•
Selected method
Access
☞
746 Roads - Road