Leica Captivate, Техническое справочное руководство

Страница: 455 / 1060

Next step
OK
changes to Set Backsight Reference .
Available when the instrument was set up using Setup method : Known back-
sight .
Set the backsight to which the angles of the foresight measurements are rela-
ted.
The current setup is used.
Description of fields
Field Option Description
Use the cur-
rent back-
sight as the
reference
point
Option but-
ton
Available when the instrument was set up
using Setup method : Known backsight .
The backsight from the current setup is used.
Foresight measurement is referenced to the
backsight.
Set another
backsight as
reference
point (the
current
setup will
be updated)
Option but-
ton
Available when the instrument was set up
using Setup method : Known backsight .
The backsight from the current setup is
ignored. A new backsight must be defined.
Next step
IF THEN
Use the current backsight as the
reference point was selected
OK to measure backsight-foresight
sets.
Set another backsight as refer-
ence point (the current setup will
be updated) was selected
OK accesses Define the Backsight .
Refer to "Define the Backsight".
This panel is displayed
•
when the instrument was set up without a known backsight. The instru-
ment is orientated but has no physical point as a backsight. Therefore a
backsight point must be measured.
•
when Set another backsight as reference point (the current setup
will be updated) was previously selected.
Key Description
Set To set the setup and orientation.
Distance To measure a distance to the point being used to set the azi-
muth.
GS When using SmartPole. To enter the Measure panel and
measure a point with GS. The antenna height is automatically
converted from the target height.
More To change between the slope and the horizontal distance.
Set Backsight Refer-
ence
Define the Backsight
Apps - The Toolbox 455