Leica Captivate, Техническое справочное руководство

Страница: 898 / 1060

Field Option Description
Start within Editable field Available when Beep faster
when getting close to point is
checked. The horizontal radial dis-
tance, from the current position
to the point to be staked.
Next step
Page
changes to the Quality control page.
Description of fields
Field Option Description
Check dif-
ferences
before stor-
ing
Check box Allows a check to be made on the horizontal
and vertical difference between the staked
point and the point to be staked. If the
defined limit is exceeded, the stake out can
be repeated, skipped or stored.
Differences
to check
Position ,
Height or
Position &
height
The type of differences to be checked before
storing a point.
Position
limit
Editable field Available when Check differences before
storing is checked. Sets the maximum hori-
zontal coordinate difference accepted in the
position check.
Position
limit
Editable field Available when Check differences before
storing is checked. Sets the maximum verti-
cal difference accepted in the height check.
Prompt off-
setting
annotation
Check box Available for the Seismic stakeout app.
When this box is checked, a specific annota-
tion must be entered when the current
staked point is out of distance tolerance.
This annotation is stored as annotation 1.
Next step
Page
changes to the Heights page.
Description of fields
Field Option Description
Allow edit-
ing the
height of
the selected
point
Check box When this box is checked, the value for
Design height displayed in Stake Points ,
page, can be changed. The design height
is the height of the point to be staked.
When this box is not checked, the value for
Design height cannot be changed.
Settings,Quality con-
trol page
Settings,
Heights page
898 Stakeout