Leica Captivate, Техническое справочное руководство

Страница: 887 / 1060

☞
Measure Foresight from the toolbox for apps cannot be used when
this setup method was used.
•
The measured setup points must have 3D coordinates. 1D (height only) or
2D (position only) coordinates are not allowed.
•
Distances must be measured to at least three target points.
•
The scale factor of 1 is used. A user defined scale factor is ignored.
To check the current scale factor select Current setup in the Instrument .
The scale factor is defined on the TS scale page when creating or editing
a job.
In Total Station Setup , select Setup method: Orientate to object . Press
OK .
In Setup Details type in the required information. Press OK .
For a description of the Measure Target panel, refer to "50.6.2 Multiple back-
sights".
50.7 Setup Results
The results panel is displayed after pressing Calculate in the Measure Target
panel. The results panel is part of the Multiple backsights , Transfer height ,
Resection , Orientate to line and Orientate to object setup methods.
After three measurements to known targets, the calculations can be done
using the robust method or the least squares method.For Resection , the cal-
culations can also be done using the Helmert method.For Orientate to
object , the calculations are always done using the robust method. For Orien-
tate to line , no adjustment is applicable.
After the setup is set, all following measurements will be related to this new
setup and orientation.
For information on camera and images refer to "32 Camera & Imaging".
Key Description
Set To set the orientation, to store all setup data and exit the
app.
For Transfer height :
To store all setup data and exit the app.
Requirements
Access
☞
Description
☞
Setup Results,
Results page
Setup - TS 887