Leica Captivate, Техническое справочное руководство

Страница: 861 / 1060

Field Option Description
Automatic Positioning to static prisms. The ATRplus sen-
sor is used for measurements to static
prisms. If needed, an ATRplus measurement
or ATRplus search is performed after pressing
Measure or Distance .
With lock The instrument locks onto and follows the
moving prism. The ATRplus sensor is used to
follow moving prisms and to find prisms after
loss of lock. Depending on the setting for
Measure distance , single or continuous
measurements are performed. Unavailable
for SmartStation.
Visibility Available when a CS20 is connected to a
TS15/TS50/TM50/MS50.
TS16/TS60/MS60 automatically adjust the
settings for optimal performance.
Good If weather conditions are normal, then select
this setting.
Rain & fog To increase the instrument measuring ability
during suboptimal weather conditions. This
setting is automatically deactivated when the
instrument is turned off.
Sun &
reflections
To increase the instrument measuring ability
during incident solar radiation and reflec-
tions, for example safety vests. This setting
has a considerable influence on the range
(restriction 100 - 150 m). This setting is
automatically deactivated when the instru-
ment is turned off.
Use precise
target aim-
ing
Check box Available for instruments other than TS60/
TM50/TS50/TS30TS60. When this box is
checked, four ATRplus measurements are
performed and the mean value out the
measurements is considered for the angle
value.
Use ultra
fine aiming
Check box Reduces the field of view of the ATRplus. The
setting is only applied for Aim at target :
Automatic .
Automati-
cally meas-
ure points
Check box Available for instruments with automatic aim-
ing and Aim at target:Automatic . If
checked, search and measurements are done
to specified targets in sets.
Next step
Measure
to measure further sets of the selected points.
•
Motorised instruments point automatically in the direction of the targets.
•
Instruments with automatic aiming and auto survey activated, measure the
targets automatically.
☞
Sets of Angles - TS 861