Key
Description
Distance
Available for manual scanning. To measure a distance.
Store
Available for manual scanning. To store angles and distance.
Distance must be measured before.
Next point
To skip the point being measured and move onto the next
profile point.
P
To stop scanning the current profile and move onto the next
profile.
Manual
or
Auto
To switch between manual and automatic scanning.
Page
To change to another page on this panel.
Fn
Settings
To configure the app. Refer to "43.3 Configuring Roads
Fn
Temp
To define a temporary scan interval. Until the temporary scan
interval is disabled, all scan segments are scanned at the
defined temporary scan interval.
Fn
Tools
To access the toolbox. Refer to "47.4 The Toolbox".
Description of fields
Field
Option
Description
Point ID
Editable field
The point identifier of the point to be
staked.
Instrument
chainage
Editable field
The chainage of the instrument setup.
Start chain-
age
and
Start dis-
tance
Editable field
Enter/measure a chainage/distance value
where scanning starts along the alignment.
The start can be before or after the station
chainage. If entering a distance value to indi-
cate start scanning before the station chain-
age use a negative. If entering a distance
value to indicate start scanning after the sta-
tion chainage use positive.
End chain-
age
and
End dis-
tance
Editable field
Enter/measure a chainage/distance value
where scanning ends along the alignment.
The end can be before or after the station
chainage. If entering a distance value to indi-
cate end scanning before the station chain-
age use a negative. If entering a distance
value to indicate end scanning after the sta-
tion chainage use positive.
Before
instrument
Editable field
If the scan area starts before the station
chainage then define how often to scan a
profile along the alignment from this chain-
age until the defined end chainage or station
chainage. The chainage which ever comes
first is used.
820
Roads - Tunnel
Содержание Captivate
