Leica Captivate, Техническое справочное руководство

Страница: 725 / 1060

For Element type : Curve
Field Option Description
Method Radius &
length
Using the radius of the curve and its length.
Radius &
end chain-
age
Using the radius and the end chainage of the
curve.
Radius &
grades
Using the radius and the grades of the curve.
Length &
grades
Using the length and the grades of the curve.
End chain-
age &
grades
Using start, intermediate and end elevation
and chainage of the curve.
Next step
OK
to access the next panel.
Key Description
OK To accept the panel entries and continue.
Inverse To calculate the distance and angle between two points from
the job.
Last inv To select values from the last inverse calculations.
Get point To apply coordinates or heights from an existing point in the
job. Available when coordinates must be typed in.
Meas app To go to Measure and measure a point. Available when ele-
vation must be typed in.
Page To change to another page on this panel.
Fn Settings To configure the app. Refer to "44.3 Configuring Alignment
Editor".
Fn Reset To reset all panel entries.
Fn
% / V:H / H:V
To switch between h:v , v:h and %(v/h x 100) for the grade
unit.
Vertical Straight/
Vertical Parabola/
Vertical Curve,
Input page
Roads - Alignment Editor 725