![background image](http://html1.mh-extra.com/html/leica/captivate/captivate_technical-reference-manual_1873164744.webp)
Field
Option
Description
Slope loca-
tion
Left
or
Right
Defines if the slope is left or right of the
hinge point.
a
b
c
d
e
Road_079
a Hinge Point
b Left, cut
c Right, cut
d Left, fill
e Right, fill
Use cut
and
Use fill
Check box
When the box is checked, a cut/fill is used for
the calculation. During the surveying process,
the system calculates if it is a cut or a fill.
Check only one box to work only with cut or
fill.
Cut slope
and
Fill slope
Editable field
Defines the cut/fill ratio of the slope.
☞
The slope ratio format is defined
as system setting in
Regional
,
Slope
page.
On the
Hinge offset
page:
Apply hinge
offsets
Check box
When this box is checked, a horizontal and
vertical offset of the hinge point can be
defined.
Offset
Editable field
The horizontal offset of the hinge point from
the centreline/reference line.
Height off-
set type
The vertical offset type for the hinge point.
Absolute
The only option available for 2D lines.
Relative to
line
or
Relative to
DTM
Available for 3D lines.
Relative to
surface
grade
Available for
Stake
:
Manual slope
. The
manual slope is defined by:
•
Hinge offset relative to the selected
hinge reference line
•
Hinge height, calculated by using the
hinge offset on the selected surface
grade (left or right selected surface
grade, depending on
Offset
– or +)
744
Roads - Road
Содержание Captivate
