Field
Option
Description
Following
arrow
The direction of the orientation is from the
current moving direction to the point to be
staked. The graphical display shows an arrow
pointing in the direction of the point to be
staked. The current position must have
moved at least 0.5 m for the orientation to
be calculated.
Facing sun
For GS:
The position of the sun calculated from the
current position, the time and the date.
Point ID
Selectable list Available for
Help me navigate:
Facing
point (design data)
. To select the point or
line to be used for orientation.
Navigational
arrow types
The method of staking out.
Direction &
distance
The direction from the orientation reference,
the horizontal distance and the cut/fill are
displayed.
In/out, left/
right
The distance forwards to/backwards from the
point, the distance right/left to the point and
the cut/fill is displayed.
Switch to
bulls-eye
when 0.5m
(1.5ft) from
point
Check box
When this box is checked, a bulls eye bubble
is shown in the stakeout graphic when less
than half a metre from the point being
staked.
Beep faster
when get-
ting close
to point
Check box
The instrument beeps when the distance
from the current position to the point to be
staked is equal to or less than defined in
Start within
.
The closer the instrument is to the point to
be staked the faster the beeps are.
Distance to
use
Height
,
Hor-
izontal dis-
tance
or
Position &
height
Available when
Beep faster when getting
close to point
is checked. The type of dis-
tance to use for the stake beep.
Start within
Editable field
Available when
Beep faster when getting
close to point
is checked. The horizontal
radial distance, from the current position to
the point to be staked, when a beep is to be
heard.
Next step
Page
changes to the
Heights
page.
☞
The following field is shown in the Stake and Check methods except
for
Slope
and
Manual slope
.
Road Settings,
Heights page
Roads - General
631
Содержание Captivate
