Leica Captivate, Техническое справочное руководство

Страница: 807 / 1060

46.3.2 Offset Library
To select a different stored offset or to create a new point.
1. In Stake Track / Check track , page, select Offsets : From library .
2. Highlight Offset ID and open the selectable list.
Display of information about the reference rail or the offset and the height dif-
ference.
This panel allows offsets relative to a reference line to be defined and stored in
the rail job. These points can be recalled at any time.
Key Description
OK To select a defined offset and to continue.
Add To enter an offset.
Edit To edit an existing offset.
Delete To delete an existing offset.
Next step
Press Add or Edit .
This panel allows the values of the stake/check offsets to be entered/edited. In
addition to the horizontal and vertical offsets, an offset name (point ID) can be
entered for each item.
Next step
Press OK twice to return to Stake Track / Check track .
46.3.3 Working with Pendular Displacements
In Stake Track / Check Track , page, check Use pendular displacement and
type in a value for Pendular length .
Value Description
Pendular
length
The defined pendulum length as entered on page.
Description
Access step-by-step
Offset library
Job name,
Offsets
Requirements
Specific values on the
page
Roads - Rail 807