Leica Captivate, Техническое справочное руководство

Страница: 710 / 1060

Field Option Description
Horizontal
deflection
tolerance
Editable field The deflection tolerance for horizontal align-
ments. The tolerance value used for deter-
mining deflection errors. A deflection error
occurs when the beginning curve tangent of
an element does not match the ending tan-
gent of the previous element. If the current
error in deflection is greater than this value,
the error is reported.
Check verti-
cal deflec-
tion
Check box Possibility to do a deflection check for the
vertical alignment.
Vertical
deflection
tolerance
Editable field The deflection tolerance for vertical align-
ments.
Confirm end
coordinates
of segment
before stor-
ing
Check box If this box is checked, then each time a new
alignment element has been entered, a con-
firmation message displays the end coordi-
nates for confirmation.
Next step
Page
changes to the Advanced page.
Description of fields
Field Option Description
Vertical
parabola
definition
Parameter defining the parabola.
Parameter p
K factor K factor = Parameter p/100.
Use PI
instead of
element for
horizontal
alignment
definition
Check box When this box is not checked, elements such
as straights, curves and parabolas define the
horizontal alignment.
When this box is checked, the horizontal
alignment is defined by P oints of I ntersec-
tion. PIs are tangent or geometrical points.
• Horizontal alignments are defined by the
coordinates of the PI and, for circular
curves, the curve radius.
• Horizontal transitions are defined by
coordinate of PI, the circular curve radius
plus tangent length in and tangent
length out.
Settings,
Advanced page
710 Roads - Alignment Editor