Leica Captivate, Техническое справочное руководство

Страница: 592 / 1060

• Curve - Along a curve section
• Extension - Along an extended part of the line
• Curve mid point - Mid curve point
• Straight - Along a straight section
• VPI - Vertical interesection point
• Offset PI avg - Offset intersection point average element
If View results after staking a point is checked in Settings , General page,
this panel opens automatically once a point is measured and stored.
Key Description
OK To return to the stake panel.
Edit To add a vertical offset to the design height and to display
the new height.
Page To change to another page on this panel.
Description of fields
Field Option Description
Point ID Editable field The point ID of the point staked.
Chainage Display only The chainage measured at the stored point.
Offset Display only The offset from the alignment measured at
the stored point.
Design height Display only The entered design elevation.
Measured
height
Display only The height measured at the stored point.
Cut / Fill Display only The height difference between the Design
height and the Measured height .
Annotation 1 Display only Fixed value recorded for certain software
packages.
Annotation 2 Editable field Available for extra notes.
Next step
Page
changes to the Coords page. This page displays the design coordinates
as well as the differences between design and measured coordinates.
Page changes to the Code where codes can be selected or typed in.
3D viewer provides an interactive display of the data.
Results,
General page
592 Measure to line/Stake to line