Leica Captivate, Техническое справочное руководство

Страница: 815 / 1060

Key Description
Fn Settings To configure the app. Refer to "43.3 Configuring Roads
Apps".
Description of fields
Common to all methods
Field Option Description
Layer Display only
or selectable
list
Layers contained in the active tunnel job can
be selected.
Centreline Display only The name of the layer centreline.
For Tunnel face
Field Option Description
Drilling rig
orientation
Check box This functionality helps to orientate the drill-
ing rig when drilling holes parallel to the tun-
nel axis direction. The entry point at the tun-
nel face is marked and delta angles to align
the drilling rig are provided.
The following fields are available when Drilling rig orientation : Parallel to
alignment is selected in Tunnel Settings , Tunnel design page:
Drilling dis-
tance
Editable field The bore hole length. Available when Drilling
rig orientation is checked and used to cal-
culate the direction parallel to the alignment.
Check
Jumbo posi-
tion
Check box When this box is checked, the jumbo posi-
tion is checked after measuring to the back
of the boom.
Boom
length
Editable field The length of the boom is used for calculat-
ing and checking the jumbo position when
Check Jumbo position is checked.
Tolerance Editable field Defines how accurately the boom must be
positioned to calculate the delta angles (max
10% of boom length). Available when Check
Jumbo position is checked.
The following fields are available when Drilling rig orientation : Drill Pat-
tern is selected in Tunnel Settings , Tunnel design page:
Apply drill
pattern
from
Meas chain-
age
The drill pattern is directly applied to the
measured chainage.
To acquire the measured chainage, take a
measurement, press Fn Tools and select
Apply current chainage .
Defined
Chainage
This chainage is typed manually into the
Stake chainage editable field. It is used to
calculate the corresponding position and drill
direction at the measured chainage.
Roads - Tunnel 815