Leica Captivate, Техническое справочное руководство

Страница: 873 / 1060

Field Option Description
Add target
points to
the Power-
Search filter
Check box When this box is checked, the setup points
are included in PowerSearch scans looking
for available prisms. Refer to " Bubble icons"
for more information.
☞
By unchecking the box, the likeli-
hood to only find the correct prims
on the robotic pole is increased
and the time to find the prisms is
significantly decreased.
Next step
Page
changes to the Known backsight page.
For Setup method: Known backsight , the settings on this page apply.
Description of fields
Field Option Description
Check
measure-
ment to
backsight
(2D posi-
tion)
Check box Allows a check to be made on the horizontal
coordinate difference between the existing
and the measured known backsight point. If
the defined Position limit is exceeded, the
setup can be repeated, skipped or stored.
Position
limit
Editable field Available when Check measurement to
backsight (2D position) is checked. Sets
the maximum horizontal coordinate differ-
ence accepted in the position check.
Check
measure-
ment to
backsight
(1D height)
Check box Allows a check to be made on the vertical
difference between the existing and the
measured known backsight point. If the
Height limit is exceeded, the setup can be
repeated, skipped or stored.
Height limit Editable field Available when Check measurement to
backsight (1D height) is checked. Sets the
maximum vertical difference accepted in the
height check.
Next step
Page
changes to the Advanced page.
Settings,
Known backsight
page
Setup - TS 873