Leica Captivate, Техническое справочное руководство

Страница: 855 / 1060

Key Description
OK To select the checked option and to continue with the next
panel.
Description of options
Option Description
Measure
points
When this box is checked, the points to be used for Sets of
Angles can be measured.
Use within a
set of
measure-
ments
Available when Measure points is checked. To select the
measuring sequence.
Add individ-
ual points
from a job
When this box is checked, a design job can be selected. Indi-
vidual points can be selected from this job. Refer to "Select
Points - Measure,Sets page".
Add all
points from
a job
When this box is checked, a design job can be selected. All
points from the design job are added to the point group by
pressing OK .
☞
The points are sorted in alphabetical order. To sort points by horizon-
tal angle, check Sort points by Hz angle in SettingsParameters ,
page.
Key Description
OK To store the points to the group.
Select To change the setting for the Select metadata for the high-
lighted point.
More To display information about the 3D coordinate quality, the
class, Easting, Northing and Elevation, the time and the date
of when the point was stored,
Page To change to another page on this panel.
Fn All or Fn
None
To change the setting for the Select metadata for all scans
at once.
Next step
In 3D viewer , the points from the list are displayed in black. The other points
from the job are displayed in grey.
Add Points To Group
Select Points to be
Added,
Points page
Sets of Angles - TS 855