Leica Captivate, Техническое справочное руководство

Страница: 953 / 1060

Key Description
OK To accept changes and to return to the panel from where
this panel was accessed.
Edit Available on the Parameters page when a list item in Page
to show is highlighted.
To edit the page currently being displayed. Refer to "26.2
User defined pages ".
Page To change to another page on this panel.
Fn About To display information about the app name, the version num-
ber, the date of the version and the copyright.
Description of fields
Field Option Description
Measure
sequence
B'F'...F''B'' All points are measured in face I, then meas-
ured in face II in reverse sequential order.
B'F'...B''F'' All points are measured in face I, then meas-
ured in face II.
B'B''F'F''... Backsight point is measured in face I immedi-
ately followed by face II. Other points are
measured in face I, face II order.
B'B''F''F'... Backsight point is measured in face I immedi-
ately followed by face II. Other points are
measured in alternating face order.
B'F'... All points are measured in face I only.
Allow multi-
ple fore-
sight points
Check box Option to define if only one foresight point
or multiple points are used during the sets.
When using
automatic
target aim-
ing, auto-
matically
measure the
targets
Check box For instruments with automatic aiming and
this option checked, automatic aiming search
and automatic aiming measurements are
done to specified targets and subsequent
sets.
Show addi-
tional page
from User
defined
pages
Check box The user-defined page to be shown in the
Traverse panel.
Settings,
Parameters page
Traverse 953