Leica Captivate, Техническое справочное руководство

Страница: 986 / 1060

Field Option Description
3D Face &
Polyface
mesh
When this option is selected, the 3D Face
and Polyface mesh entities are imported. The
triangulation is created based on the existing
model in the DXF.
3D Face ver-
tices
When this option is selected, the three or
four points from the 3D Face entity are
imported. Only the points are imported. The
surface will be created based on the triangu-
lation settings.
Points When this option is selected, point objects
are imported.
From Selectable list Defines from which storage device the data
is imported.
From file Selectable list For Data type to import: ASCII data
(point ID,E,N,Ht) and Data type to
import: ASCII data (point ID,N,E,Ht) : All
files in the
\
DATA directory on the data stor-
age device can be selected.
For Data type to import: DXF data and
Data type to import: PTS data : All files
with extension *.dxf or *.pts in the
\
DATA
directory on the data storage device can be
selected.
Next step
OK
to import the data and to access Define Object to Compare .
60.4.5 From Road or Tunnel Design Data
The requirements depend on the selected file format:
•
Inspect Surfaces Road & Inspect Surfaces Tunnel are an option in the appli-
cation and an additional license for each one must be loaded to be availa-
ble.
•
At least one Road or Tunnel job has to be stored in the \DBX directory of
the data store device.
Key Description
OK To import the data.
Fn Settings To configure the app. Refer to "60.3 Configuring Inspect sur-
faces".
Description of fields
Field Option Description
Type of
design
Road or Tun-
nel
Availability depends on loaded license an
existing job.
Layer Display only The selection layer for the current Road/
Tunnel job.
Requirements
Define Design Data
986 Inspect Surfaces