Leica Captivate, Техническое справочное руководство

Страница: 683 / 1060

Field Option Description
Use align-
ment
Before/after the defined shift range, no shift
is added. Outside of the defined shift area
the original design is used. This option
means a "step" appears at the start and/or
end of the shifted area.
In the 3D viewer, the design data is shown in its original position. The point to
stake symbol is shown in its shifted position.
The sign convention for design shifts is identical to the convention used for
stake offset and height difference.
a
g b
c
d
e
f
+ +
Road_053
a Centreline
b Line on left side
c Negative horizontal shift
d Negative vertical shift
e Line on right side
f Positive horizontal shift
g Positive vertical shift
Horizontal stake offsets are always defined perpendicular to the centreline of
the layer the line/s belongs to.
a
b
d
c
Road_010
a Line the horizontal shift is
applied to
b User defined horizontal shift
for the line
c Centreline
d Shifted line
The shifts applied to lines, slopes, road crowns layers and DTMs are identical
with one exception: Given that DTMs are not defined relative to a centreline
and hold no orientation information, no horizontal shift is possible for a DTM.
a
d
e
b
c
Road_016
a Slope to shift
b Centreline
c Value for horizontal shift
d Value for vertical shift
e Shifted slope
Plot with shifts
Sign convention for
shifts
☞
Shifts for lines,
slopes, layers and
DTMs
Roads - General 683