Leica Captivate, Техническое справочное руководство

Страница: 874 / 1060

For Setup method: Resection and Setup method: Multiple backsights , the
settings on this page apply.
Description of fields
Field Option Description
Automati-
cally turn TS
to next tar-
get point
Check box When this box is checked, the instrument
positions horizontally and vertically to the
point.
Measure
target
points while
measuring
other points
(on-the-fly)
Check box When this box is checked, the setup points
can be measured together with the survey
points. It is not necessary to complete the
setup before measuring survey points. Until
you select Set in Setup Results , this type
of setup is regarded as incomplete.
Calculate &
show scale
from the
measure-
ments made
to targets
Check box Only available if Scale TS measurements is
unchecked in the job properties TS scale
page.
If checked, a setup scale is calculated from
the target observations. You can apply this
new scale (calculated ppm + current ppm =
new ppm) to all survey observations, includ-
ing the setup observations, from that setup.
If not checked, then the calculated ppm is
not displayed and therefore not applied to
any survey observations.
For resec-
tions use
Helmert
method for
calculations
Check box Helmert calculation is used.
Height
weighting
1/distance
or 1/
distance²
Available when For resections use Helmert
method for calculations is checked. To
change the distance weighting that is used in
the calculation of the setup height in the
resection.
Edit the
default
setup limits
Check box Check to type in values for standard devia-
tion, position and height accuracy. If the lim-
its are exceeded, a message is shown when
Calculate is selected.
Orientation
limit
Editable field Available when Edit the default setup lim-
its is checked. Define a limit for the standard
deviation of the orientation.
Position
limit
Editable field Available when Edit the default setup lim-
its is checked. Define a position accuracy of
the target point.
Height limit Editable field Available when Edit the default setup lim-
its is checked. Define a height accuracy of
the target point.
Settings,
Advanced page
874 Setup - TS