Leica Captivate, Техническое справочное руководство

Страница: 575 / 1060

Field Option Description
Design east-
ing
Displays the Easting of the design point.
Design
North
Displays the Northing of the design point.
Design
height
Displays the height of the design point,
depending on the defined heights to use.
For slope only also available
Current
slope ratio
Displays the ratio of the slope from the cur-
rent position to the hinge.
Slope
design ratio
Displays the defined ratio of the slope from
the design point to the hinge.
Slope dis-
tance to
hinge
Displays the slope distance offset from the
hinge to measured point.
Slope dis-
tance to
line
Displays the slope distance offset from line
to measured point.
Height dif-
ference to
slope
Displays the height difference between the
current position and the height of the slope
at that position. A cut is above the slope. A
fill is below the slope.
Hinge offset Displays the horizontal offset from the hinge
point of the slope to the current position.
Hinge
height diff
Displays the height difference from the hinge
point of the slope to the current position.
Next step
Page
changes to the TS specific page.
Description of fields
Field Option Description
Do not
update
stakeout
values
between
distance
measure-
ments
Check box When this box is checked, angles and stake-
out values are updated after a distance was
measured. Then all values are frozen until
the next distance is taken.
Automati-
cally aim
instrument
to point
being
staked
Check box When this box is checked, the instrument
positions automatically to the point to be
staked.
Automatic
behaviour
Available when Automatically aim instru-
ment to point being staked is checked.
Settings,
TS specific page
Measure to line/Stake to line 575