Leica Captivate, Техническое справочное руководство

Страница: 578 / 1060

Key Description
When Quick Line is the selected task, the line is defined by two points from
the design job, instead of an existing line.
☞ When the task is finished or a new quick line is defined, the previ-
ously defined quick line is automatically deleted from the database.
Key Description
OK To accept changes and continue with the subsequent panel.
Shifts To apply horizontal and vertical shifts to the defined line.
Refer to "Define Shifts".
Meas app To measure a point. Available when Start point or End
point is highlighted.
Fn Settings To configure the Measure to line/Stake to line app.
Description of fields
Field Option Description
Start point Selectable list The first point forming the line.
End point Selectable list The last point forming the line.
Azimuth Display only The direction from the first to the second
known point.
Horizontal
distance
Display only The horizontal distance between the two
known points.
Height dif-
ference
Display only The height difference between the two
known points.
Slope dis-
tance
Display only The slope distance between the two known
points.
Grade Display only The grade between the two known points.
Height Selectable list Depending on the task chosen this parame-
ter determines the design height.
•
When measuring to a line, it affects the
height difference value.
•
When staking, it affects the delta height
value.
From line Heights are computed along the line.
User
entered
Heights are typed in manually into the
Height field.
Start point
of line
Heights are computed relative to the height
of the starting point of the line.
Define Quick Line
578 Measure to line/Stake to line