Leica Captivate, Техническое справочное руководство

Страница: 577 / 1060

Key Description
Create To create a line. Refer to "12 Creating Points and Lines".
Shifts To apply horizontal and vertical shifts to the selected line.
Refer to "Define Shifts". Available for lines only. If using line
segments, shifts are applied in the Define Segment panel.
Page To change to another page on this panel.
Fn Settings To configure the Measure to line/Stake to line app.
Fn Report To view an alignment report. Refer to "Save Line
Report,Points page".
Description of fields
Field Option Description
Line Selectable list To select a line. Open the selectable list to
access the Line Selection panel showing all
selectable lines from the design job.
Type Display only The selected line type as straight, arc or
polyline.
Length Display only The horizontal grid distance between the
two points of the line.
Start chain-
age
Display only The beginning chainage of the line.
Height Selectable list Depending on the task chosen this parame-
ter determines the design height.
•
When measuring to a line, it affects the
height difference value.
•
When staking, it affects the delta height
value.
From line Heights are computed along the line.
User
entered
Heights are typed in manually into the
Height field.
Start point
of line
Heights are computed relative to the height
of the starting point of the line.
DTM The height computed from the DTM at the
current position.
Next step
OK
accesses Define Slope , Define Segment , Measure to Line or Define
Stake .
Key Description
Reverse To reverse the direction of the lines, so that the distance
along line/chainage increment is in the opposite direction to
the original:
Original: Reverse:
Define Line,
3D viewer page
Measure to line/Stake to line 577