Leica Captivate, Техническое справочное руководство

Страница: 759 / 1060

Field Option Description
Check
height diff
Editable field Available for Check. Vertical offset from the
reference line or surface, as defined by the
chosen method, of the point to stake.
☞
The following field is shown for the Stake methods Line , Local
line , Local manual slope and Manual slope .
Use non-
perpendicu-
lar offset
Check box When this box is not checked the measured
point is projected in a right angle to the
selected line.
When this box is checked, any projection
angle can be defined.
Offset angle Editable field Manually defined projection angle.
☞
The following fields are shown in the Line , Local line , Surface
grade and Crown methods when Show information to an addi-
tional line is checked in the Define panel.
Apply off-
sets to
additional
line
Check box When this box is checked, an offset to the
additional line can be defined.
Horizontal
offset
Editable field Horizontal stake/check offset to the addi-
tional line.
Vertical off-
set
Editable field Vertical stake/check height difference to the
additional line.
Next step
Page
changes to the page.
Type of height Overrules Height offset
Manually entered
OR
Obtained from individ-
ual point
All other heights Considered
Use DTM height for
stakeout (toolbox: Use
heights from DTM )
Design height Considered
From design No other heights Considered
Show DTM height differ-
ence on Info page
(toolbox: Use heights
from DTM )
No influence on priori-
ties
For additional info only
-
A user-definable page exists for each of the stake methods and check
methods. Refer to the chapters from "43.3.2 Road Line - Info Page"to "43.3.8
Road DTM - Info Page".
Refer to "Road Settings,Info page" for information on all available items for the
page and how to select them.
Understanding priori-
ties of various
heights
Stake/Check panel,
page
Roads - Road 759