Leica Captivate, Техническое справочное руководство

Страница: 756 / 1060

Key Description
For TS:
To store angles and distance. Distance must be measured
before.
Distance For TS:
To measure a distance.
Ch - Available for Stake road . To decrease the chainage as
defined by Chainage increment .
Ch + Available for Stake road . To increase the chainage as
defined by Chainage increment .
Page To change to another page on this panel.
Fn Settings To configure the app. Refer to "43.3 Configuring Roads
Apps".
Fn Position For TS:
To position the TS to the defined stakeout point, including
defined offsets. The settings for Automatically aim instru-
ment to point being staked in Road Settings , TS specific
page, apply. Refer to " Road Settings,TS specific page".
Fn Tools To access the method-specific toolbox. Refer to "45.4 The
Toolbox".
Description of fields
Field Option Description
☞
The following fields are always shown in all Stake and Check meth-
ods.
Point ID Editable field Name of the next point to be stored. The ID
is incremented/decremented whenever a
point gets stored.
Antenna
height
Editable field For GS:
Height of the antenna.
Target
height
Editable field For TS:
Height of the prism.
☞
The following fields are always shown in all Stake methods, except
for method Layer .
Stake chain-
age
Editable field Nominal chainage of the point to be staked
out.
To get the information relative to the current
measured TS position or the current GS loca-
tion without leaving the app:
1 Tap into the Stake chainage field.
2 Use the Backspace button to
delete the whole content in the
field.
0014264_001
3 Press the ENTER button.
---- is displayed.
756 Roads - Road