background image

www.pasco.com

1.

  

Unpack the Xplorer GLX 

 

A.

 GLX Users’ Guide  

 

 

B.

  Xplorer GLX  

 

 

 

C.

  AC Power Adapter 

 

 

 

D.

  Registration Card 

 

 

 

 

E.

  Getting Started with the   

 

 

 

 

Xplorer GLX CD-ROM

3.

 

Collect Data With a Temperature Probe

 

1.  Connect one of the included temperature probes to   

 

 

     one of the temperature ports on the left side of the GLX.

 
 

2. The Graph display will launch automatically to plot  

 

    Temperature vs. Time.

 

3.  Press 

The GLX is now recording and graphing data from the temperature probe.

 

4.  Press 

 to automatically scale the graph.

 

6.

  

Select a Language

The GLX has several language options. Follow these steps to select your 
preferred language. 

 

1. Press 

 to go to the Home Screen.

 

2. On the Home Screen, Press the arrows keys to highlight the 

 

    Settings icon.

  

3. Press 

  to open the Settings screen.

 

4. Press the down arrow key to highlight Language.

A

B

C

E

F

G

H

D

Printed in USA

012-09310B

Rev. 6/06

Connect the AC Adapter  
to the Power Port.

Quick-Start

Instructions

 

2.  If the Graph is not already displayed on the screen,  

 

   press

 and 

 at the same time to go to the Graph.

 

3.  Press 

  then press 

  to start a new graph ready to  

 

   display data from the PASPORT sensor.

 

4.  Press 

 to start data recording.

 

5.  To stop data recording, press 

 again.

5.

 

Learn more about the GLX:

 

    

  Connecting to your computer

 

    

  Using a mouse or keyboard

 

    

  Printing directly to a printer

 

    

  Using the calculator, etc.

 

  

Please:

 

    

  Read the GLX Users Guide

 

    

  See User’s Guide for ten introductory  

 

       activities using the included GLX sensors.

 

    

  View the tutorial movies on the  

 

       Getting Started with the GLX CD-ROM

 

    

  Visit www.pasco.com/glx

F.  

Two Fast-response

      Temperature Probes

G.  

Voltage Probe

H.  

USB host-connection cable

Technical Support

For assistance with the Xplorer GLX and other  
PASCO products, contact PASCO Technical Support at:
 
 

  

Address:

 

PASCO scientific

 

  

   

10101 Foothills Blvd.

 

  

   

Roseville, CA 95747-7100 USA

 

  

Phone:

 

(800) 772-8700 (in the U.S.)

 

  

   

(916) 786-3800 (wordwide)

 

  

Fax:

 

(916) 786-7565

 

  

Web:

 

www.pasco.com/support/

 

  

Email:

 

[email protected]

2.

  

Connect Power and Charge  

the Battery

 

1.  Connect the AC adapter to the power port on the  

 

            right side of the GLX. 

 

 

2.  Plug the adapter into an AC power outlet.

   

 

When you connect the AC adapter, the GLX turns on automatically 
and the battery starts charging.
You can start using the GLX immediately, but leave it plugged in 
overnight (at least 14 hours) to fully charge.
Once the battery has been charged, you can use the GLX without 
the AC adapter. To turn it on using battery power, push the power 
button at the lower-right corner of the keypad  

  and hold it for 

about one second.

 

5.  Hold the end of the  

 

temperature probe in  

 

your hand and observe  

 

how the data plotted  

 

on the Graph reacts.

 

6. To stop data recording,  

 

press 

      

 again.

You have just collected and graphed a run of temperature data. 
To collect additional data runs, press 

 again.

4.

 Collect Data With a PASPORT Sensor

 

If you have also ordered a PASPORT sensor, try the following:

 

1.  Connect the PASPORT sensor to one of the PASPORT  

 

   sensor ports.

 

5. Press 

 to open the Language menu.

 
 

6.   Press the up or down arrow key to highlight your preferred 

language.

 

     Not all languages in the menu are visible at once. Move the 

highlight to the lowest visible language and press the down 
arrow key for additional languages.

 

7. Press 

 to select the highlighted language.

7.

  

Update Your GLX

 

1. See Chapter 5 in the User’s Guide.

 

2. Check www.pasco.com/GLX and click on “Updates”.

7

?!

Отзывы: