Leica Captivate, Техническое справочное руководство

Страница: 585 / 1060

P0
P1
P3
d1
P2
d2
GS_024
For GS:
P0 Start point
P1 End point
P2 Measured point
P3 Reference point
d1 Difference in height
d2 Line height difference
TS_030
P1
P2
P4
d1
d2
P3
P0
For TS:
P0 Instrument setup
P1 Start point
P2 End point
P3 Measured point
P4 Reference point
d1 Difference in height
d2 Line height difference
Design point outside the range of the selected element:
When measuring outside of the defined lines, lines and arcs are extended in a
straight projection tangent to the start/end of the line. For Height : From line ,
the start/end grade of the line is also extended. A warning appears when this
is the case.
When working with segments, the same extension rules are applicable to the
selected segment beyond its limits. For lines imported from a road alignment,
heights are not extended outside the segment.
An additional page is available when a user-defined page is used.
Key Description
Measure For GS:
To start measuring the point being staked. The key changes
to Stop . The difference between the current position and
the point being staked is still displayed.
Measure For TS:
To measure a distance and store distance and angles.
Measure to line - arc
segment - vertical
measurements
☞
Measure to Line,
page
Measure to line/Stake to line 585