Leica Captivate, Техническое справочное руководство

Страница: 968 / 1060

Key Description
Measure For GS:
To start measuring the surface point. The key changes to
Stop .
Measure For TS:
To measure a distance and store distance and angles.
Stop For GS:
To end measuring the surface point. The key changes to
Store .
Distance For TS:
To measure a distance.
Store To store the measured surface point. The key changes to
Measure .
Near For GS:
To search the job for the point nearest to the current posi-
tion when the key is pressed. The point is selected as the
point to be measured and is displayed in the first field on
the panel. After measuring and storing the nearest point, the
next point suggested is the one which was suggested before
the key was pressed.
Available when Measure is displayed.
→
boundry
and
→
surface
To change the type of point to be measured between sur-
face point and boundary point.
Done To finish measuring.
Page To change to another page on this panel.
Fn Settings To configure SmartCode and auto point measurements.
Fn Display To configure what is displayed in the 3D viewer.
Fn Tools Refer to "37 Apps - The Toolbox".
Fn Connect
and
Fn Discon-
nect
For GS:
To connect/disconnect from the GPS reference data.
Description of fields
Field Option Description
Point ID Editable field The identifier for measured points. The con-
figured point ID template is used. The ID can
be changed:
•
To start a new sequence of point IDs
overtype the point ID.
•
For an individual number independent of
the ID template Fn Tools .
968 Volumes & Surfaces