Leica Captivate, Техническое справочное руководство

Страница: 591 / 1060

Field Option Description
Antenna
height
Editable field For GS:
The antenna height as defined in the active
working style is suggested.
Chainage Editable field The current chainage to be staked.
Offset Editable field Current offset being staked.
Height Display only Measured elevation. The orthometric height
of the current position is displayed.
Height Editable field Design elevation. The orthometric height of
the point to be staked is displayed.
Next step
If configured, the Results panel is displayed.
Points of interest are staked out if they appear within the defined Ch- / Ch+ /
Stake - / Stake + range and if checked in Settings , Design page. Refer to
"Settings,Design page".
000262_002
P3
P5
P2
P2’
P1’
P5’
P6a’
P6’
P6c’
P6
P7
P7’
P1
P4
P6b’
P4’
On the original line:
On the offseted line:
P1 BOP - Beginning of
project
P2 PC - Beginning of curve
P3 RP - Radius point of the
centre of the curve
P4 MCP - Mid point curve
P5 PT - End of curve section -
Start of straight segment
P6 AP - Angle point
P7 EOP - End of project
P1’ Offset BOP - Beginning of
project
P2’ Offset PC - Beginning of
curve
P4’ Offset MCP - Mid point curve
P6’ AP-F - Offset angle point
projected to the next seg-
ment
P5’ Offset PT - End of curve sec-
tion - Start of straight seg-
ment
P6a’ AP-B - Offset angle point
projected to the previous
segment
P6b’ AVG - Offset in average
direction
P6c’ BP - Offset bisected point
P7’ EOP - End of project
General terms:
Points of interest
Measure to line/Stake to line 591