Leica Captivate, Техническое справочное руководство

Страница: 629 / 1060

Height limits below the design surface are entered as negative values. For
example, the Lower height limit with -10 mm in the previous diagram. Using
the signs of the height limits, it is also possible to cover situations like the one
shown in the following diagram, with a valid range between -10 to -50 mm
below the design surface.
a
c
b
Road_088
a Design surface
b Upper height limit
c Lower height limit
Description of fields
Field Option Description
Check dif-
ferences
before stor-
ing
Check box When this box is checked, a position check is
done when storing a staked or checked
point. When the defined tolerance is excee-
ded, the stake out/check can be repeated,
skipped or stored.
When this box is not checked, no quality
check is done during stake out/check of
points.
Differences
to check
☞
Depending on this selection the
following lines are enabled/disa-
bled.
Chainage,
offset &
height
Check for chainage, horizontal offset and
height.
Chainage &
offset
Check for chainage and horizontal offset.
Position &
height
Check for 2D position and height.
Position Check for 2D position.
Height Check for height.
Profile Available for Tunnel. Check for distance from
design profile.
Chainage
limit
From 0.001
to 100
Maximum difference in chainage.
Offset limit From 0.001
to 100
Maximum horizontal offset from defined
position.
Position
limit
From 0.001
to 100
Maximum radial horizontal distance.
Upper
height limit
From -100 to
+100
Maximum height difference.
Lower
height limit
From -100 to
+100
Maximum height difference.
Profile tol-
erance
From 0.001
to 100
Available for Tunnel. Permitted distance from
design profile.
Roads - General 629