Leica Captivate, Техническое справочное руководство

Страница: 923 / 1060

Key Description
Near To compare the current position with the coordinates of all
points already stored in the job and find the nearest point.
This point ID is then suggested as the next point ID to be
used.
Page To change to another page on this panel.
Fn Settings To configure the pages displayed and auto point measure-
ments.
Fn Display To configure what is displayed in the 3D viewer.
Fn Tools Refer to "37 Apps - The Toolbox".
Description of fields
Field Option Description
Point ID Editable field The identifier for manually measured points.
The configured point ID template is used. The
ID can be changed in the following ways:
•
To start a new sequence of point IDs
type over the point ID.
•
For an individual number independent of
the ID template Fn Tools .
Antenna
height
Editable field The antenna height as defined in the active
working style is suggested. Changes in the
antenna height do not update the antenna
height as defined in the active working style.
The changed antenna height is used until the
app is exited.
3D quality Display only The current 3D coordinate quality of the
computed position.
54.1.2 Real-Time Rover Operations
•
A typical working style for real-time rover operations is used.
•
The appropriate real-time device is attached and working properly.
For information on camera and images refer to "32 Camera & Imaging".
For RTK rover:
Select Leica Captivate - Home: Measure .
The fields shown are from a typical working style for real-time rover opera-
tions. The panel described consists of four pages. The explanations for the
softkeys given here are valid for the page and the two user-defined pages.
Refer to "35 3D viewer" for information on the keys in 3D viewer.
The fields and functionality of this panel vary slightly when accessed from
other apps where individual point measurements are needed.
Requirements
☞
Access
Measure
Measure - GS 923