GE Vivid 3N Pro Series, Руководство по обслуживанию

Страница: 494 / 598

GE M
EDICAL
S
YSTEMS
D
IRECTION
FK091075, R
EVISION
04 V
IVID
3N P
RO
/E
XPERT
S
ERVICE
M
ANUAL
8-124 Section 8-8 - Peripherals
8-8-2-4 Sony VCR Installation Procedure (cont’d)
2.) Connect the RS-232C cable, the Audio and S-Video IN and OUT cables, and the Power cord, as
shown in Figure 8-108 .
.
3.) Place the VCR in its correct final position.
4.) Secure the VCR by fastening the belt around it, or together with the B/W Printer (if present).
5.) Re-install the Connectors Panels Cover as described in 8-2-5-4 "Connector Panels Cover
Installation Procedure" on page 8-8 .
6) Reconnect the mains AC power cable from the wall outlet.
7) Turn ON the main circuit breaker located on rear of the Vivid 3N.
8) Turn ON the Vivid 3N by pressing the ON/OFF button on the Control Console.
9.) Under System Configuration, VCR/ECG Tab, select the appropriate VCR mode options. For more
information, see 3-8-9 "VCR/ECG Tab" on page 3-44 .
Figure 8-108 Sony VCR Connection Cables
AUDIO IN cable
From: Left Connectors Panel:
To: VCR Audio Input:
Out-R Connector (Red)
Out-L Connector (Black)
BLACK: CH1
RED: CH2
RED
BLACK
RE
D
BLACK
AUDIO OUT cable
From: Left Connectors Panel:
To: VCR Audio Output:
IN-R Connector (Red)
IN-L Connector (Black)
BLACK: CH1
RED: CH2
S-VIDEO OUT cable
From: Left Connectors Panel,
S-Video OUT
To: VCR S-Video IN
To: S-Video Output
S-VIDEO IN cable
From: Left Connectors
Panel,
S-Video OUT
To: VCR S-Video IN
Power cord
From: Left Connectors
Panel AC OUT
To: VCR AC IN
RS-232 cable
From: Left Connectors Panel,
Connector RS-232(1)
To: VCR RS-232C Input
Dip Switches Panel
Up = ON
Down = OFF
VIDEO IN
AUDIO
IN
S
VIDEO
AC IN
AUDIO
OUT
S
VIDEO
CH1
CH2
CH1
CH2