GE Vivid 3N Pro Series, Руководство по обслуживанию

Страница: 350 / 598

GE M
EDICAL
S
YSTEMS
D
IRECTION
FK091075, R
EVISION
04 V
IVID
3N P
RO
/E
XPERT
S
ERVICE
M
ANUAL
7-112 Section 7-5 - Common Service Interface
7-5-4-4 Front End Diagnostics (cont’d)
For information on performing a specific Interactive test, refer to the appropriate section, as follows:
• Transmit Test - see 7-3-8-2 "Transmit Test" on page 7-29 .
• FLA Jumper Test - see 7-3-8-3 "FLA Jumper Switch" on page 7-31
• TR Switch Test - see 7-3-8-5 "TR Switch Test" on page 7-41 .
NOTE: On the TR Switch Test, Socket 1 and Socket 2 relate to which socket the probe is plugged into.
Select the appropriate Pulser.
• Pencil Probe Test - see 7-3-8-6 "Pencil Probe Test" on page 7-43 .
7-5-5 Image Quality Page
When the Image Quality page is selected, as shown below, you can verify and calibrate image quality.
Figure 7-84 Image Quality Page
NOTE: This page is not populated in this version.
7-5-6 Calibration Page
When the Calibration page is selected, as shown below, you can perform different calibration
procedures, as described in Chapter 6, Service Adjustments .
Figure 7-85 Calibration Page
NOTE: This page is not populated in this version.