Adobe 12040118 - After Effects Standard, Руководство

Страница: 388 / 614

To the top
To the top
To the top
To the top
Iris Rotation The rotation of the iris.
Iris Radius The size of the iris. Increase this value for greater blur.
Specular Threshold All pixels with a brightness value greater than Specular Threshold are treated as specular highlights.
Specular Brightness Brightness of specular highlights.
Noise controls Film grain and noise are removed when you blur an image. To make the image look more realistic, you may want to add noise
back to the image so that it doesn’t look retouched. To add noise, set Noise Amount, and choose a noise type from the Noise Distribution menu.
To add noise without affecting the color in your image, choose Monochromatic Noise.
Stretch Map To Fit Stretches the control layer to the dimensions of the layer to which it is applied; otherwise, the control layer is centered on the
affected layer.
Radial Blur effect
The Radial Blur effect creates blurs around a point, simulating the result of a zooming or rotating camera.
You can specify the level of anti-aliasing applied at Best quality; no anti-aliasing is applied at Draft quality. At Draft quality, the blur appears
somewhat grainy. You may prefer the draft results for special effects, but the grain may flicker on interlaced displays.
This effect works with 8-bpc, 16-bpc, and 32-bpc color.
Original (left), and with effect applied (right)
Type Spin blurs in arcs around the Center point, as if the camera were rotating; Amount specifies degrees of rotation. Zoom blurs radially outward
from the center point; Amount specifies the length of the blur.
Reduce Interlace Flicker effect
The Reduce Interlace Flicker effect reduces high vertical frequencies to make images more suitable for use in an interlaced medium (such as
NTSC video). For example, images with thin horizontal lines can flicker when broadcast. Reduce Interlace Flicker applies a vertical directional blur
to soften horizontal edges to reduce the flickering.
This effect works with 8-bpc, 16-bpc, and 32-bpc color.
Note: Flicker may result from fields that haven’t been separated.
Sharpen effect
The Sharpen effect increases the contrast where color changes occur. The quality setting of the layer doesn’t affect Sharpen.
This effect works with 8-bpc, 16-bpc, and 32-bpc color.
Original (left), and with effect applied (right)
Smart Blur effect
The Smart Blur effect blurs an image while preserving lines and edges within the image. For example, you can use the Smart Blur effect to
smoothly blur shaded areas while retaining crisp outlines of text and vector graphics.