ZyXEL Communications XS3800-28, User Manual, Page: 89 / 789

Chapter 5 Initial Setup Example
XS3800-28 User’s Guide
89
C
HAPTER
5
Initial Setup Example
5.1 Overview
This chapter shows how to set up the Switch for an example network.
The following lists the configuration steps for the initial setup:
• Create a VLAN
• Set Port VID
• Configure Switch Management IP Address
5.1.1 Create a VLAN
VLANs confine broadcast frames to the VLAN group in which the ports belongs. You can do this with
port-based VLAN or tagged static VLAN with fixed port members.
In this example, you want to configure port 1 as a member of VLAN 2.
Figure 52 Initial Setup Network Example: VLAN
1
Go to the SWITCHING > VLAN > VLAN Setup > Static VLAN screen. Click Add/Edit .