
Chapter 52 Bandwidth Control
XS3800-28 User’s Guide
370
The following table describes the related labels in this screen.
Table 176 SWITCHING > QoS > Bandwidth Control
LABEL
DESCRIPTION
Active
Enable the switch button to enable bandwidth control on the Switch.
SLOT
This field appears only in Stacking mode. Click the drop-down list to choose the slot number of the
Switch in a stack.
Port
This field displays the port number. In Stacking mode, the first number represents the slot ID and the
second is the port number. Please note that the default stacking ports (the last four ports of your
Switch) cannot be configured. They are reserved for stacking only.
*
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set the
common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Ingress Rate
Active
Select this check box to activate commit rate limits on this port.
Commit
Rate
Specify the guaranteed bandwidth allowed in kilobits per second (Kbps) for the incoming traffic
flow on a port. The commit rate should be less than the peak rate. The sum of commit rates cannot
be greater than or equal to the uplink bandwidth.
Active
Select this check box to activate peak rate limits on this port.
Peak Rate Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the incoming traffic flow
on a port.
Active
Select this check box to activate egress rate limits on this port.
Egress Rate
Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the out-going traffic
flow on a port.
Apply
Click
Apply
to save your changes to the Switch’s run-time memory. The Switch loses these changes
if it is turned off or loses power, so use the
Save
link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Cancel
Click
Cancel
to reset the fields.
Summary of Contents for XS3800-28
