ZyXEL Communications XS3800-28, User Manual, Page: 35 / 789

Chapter 1 Getting to Know Your Switch
XS3800-28 User’s Guide
35
From Nebula-managed to Standalone
To return to direct management standalone mode, remove (unregister) the Switch from the inventory in
the Nebula web portal.
Note: When you change the Switch’s management mode from Nebula-manged mode to
standalone mode, the Switch will reboot and restore its factory-default settings.
To unregister the Switch:
1
Go to the Nebula Control Center (https://nebula.zyxel.com).
2
Go to the Organization-wide > License & inventory > Devices screen.
3
Select the Switch you want to remove (unregister) from the organization.
4
Click Actions , then click Remove from organization .
It will take a while for the Switch to reboot and reset to factory default.
1.1.6 ZON Utility
With its built-in Web Configurator, including the Neighbor Management feature ( Section 13.1 on page
121 ), viewing, managing and configuring the Switch and its neighboring devices is simplified.
In addition, Zyxel offers a proprietary software program called Zyxel One Network (ZON) Utility, it is a
utility tool that assists you to set up and maintain network devices in a more simple and efficient way.
You can download the ZON Utility at www.zyxel.com and install it on a PC (Windows operation system).
For more information on ZON Utility see
Section 4.3 on page 60 .
The following table shows which firmware version supports ZON and Neighbor Management (Smart
Connect) for each Switch. The firmware on each Switch is identified by the firmware trunk version,
followed by a unique model code and release number in brackets. For example, 4.70(ABML.0) is a
Table 3 Management Method Comparison
MODE ACCESS LOGIN USER NAME LOGIN PASSWORD
LOGIN IP ADDRESS/URL/
DOMAIN NAME
Cloud mode NCC (Nebula
Control Center)
portal myZyxel account
name myZyxel account
password https://nebula.zyxel.com
Web
Configurator
(Local GUI) admin Local credentials
password http://setup.zyxel
OR
http://DHCP-assigned IP
OR
a configured static IP address
Note: The Web Configurator (Local GUI) of Cloud mode supports limited features for troubleshooting
use only.
Standalone
mode Web
Configurator admin 1234 http://setup.zyxel
OR
http://DHCP-assigned IP
OR
http://192.168.1.1