ZyXEL Communications XS3800-28, User Manual, Page: 635 / 789

Chapter 84 ARP Inspection
XS3800-28 User’s Guide
635
Note: If you do not select Protocol and Prefix Glean , then the Switch cannot perform DHCPv6
snooping.
Figure 503 SECURITY > IPv6 Source Guard > IPv6 Snooping > IPv6 Snooping Policy Setup
The following table describes the labels in this screen.
84.12.1 Add/Edit a IPv6 Snooping Policy
Use this screen to dynamically create an IPv6 source guard binding table using a DHCPv6 snooping
policy. Click
Add/Edit , or select an entry and click Add/Edit in the SECURITY > IPv6 Source Guard > IPv6
Snooping > IPv6 Snooping Policy Setup screen to display this screen.
Figure 504 SECURITY > IPv6 Source Guard > IPv6 Snooping > IPv6 Snooping Policy Setup > Add/Edit
Table 344 SECURITY > IPv6 Source Guard > IPv6 Snooping > IPv6 Snooping Policy Setup
LABEL DESCRIPTION
Index This field displays a sequential number for each IPv6 snooping policy.
Name This field displays the descriptive name for identification purposes for this IPv6 source guard
policy.
Protocol This field displays the protocols learned from DHCPv6 sniffed packets.
Prefix Glean This field displays the IPv6 prefixes learned from DHCPv6 sniffed packets.
Limit Address
Count This field displays the number of IPv6 addresses and prefixes learned using the IPv6 snooping
policy.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Add/Edit Click Add/Edit to add a new entry or edit a selected one.
Delete Click Delete to remove the selected entries.