ZyXEL Communications XS3800-28, User Manual, Page: 583 / 789

Chapter 78 Anti-Arpscan
XS3800-28 User’s Guide
583
• Go to PORT > Port Setup . Clear Active and click Apply . Then select Active and click Apply again.
• Go to SECURITY > Errdisable > Errdisable Recovery and set the interval for anti-arpscan . After the
interval expires, the closed ports will become active and start receiving packets again.
• Use the command
port no inactive
.
• Refer to the port logs to see when a port was closed.
78.2 Anti-Arpscan Status
Use this screen to see what ports are trusted and are forwarding traffic or are disabled. To open this
screen, click
SECURITY > Anti-Arpscan > Anti-Arpscan Status .
Figure 457 SECURITY > Anti-Arpscan > Anti-Arpscan Status (Standalone Mode)
Figure 458 SECURITY > Anti-Arpscan > Anti-Arpscan Status (Stacking Mode)