ZyXEL Communications XS3800-28, User Manual, Page: 300 / 789

Chapter 43 Mirroring
XS3800-28 User’s Guide
300
The following table describes the labels in this screen.
43.5.1 Add/Edit Destination
Click Add/Edit , or select an entry and click Add/Edit in the SWITCHING > Mirroring > RMirror > Destination
to display this screen.
Figure 214 SWITCHING > Mirroring > RMirror > Destination > Add/Edit (Standalone Mode)
Figure 215 SWITCHING > Mirroring > RMirror > Destination > Add/Edit (Stacking Mode)
The following table describes the labels in this screen.
Table 129 SWITCHING > Mirroring > RMirror > Destination
LABEL DESCRIPTION
VLAN This field displays the ID number of RMirror VLAN over which the mirrored traffic is
forwarded.
Monitor Port This field displays the number of port that receives the mirrored traffic from the source
device for analysis.
Tagging This field displays whether the mirrored traffic is tagged with the RMirror VLAN ID.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in
the table heading row to select all entries.
Add/Edit Click Add/Edit to add a new entry or edit a selected one.
Delete Click Delete to remove the selected entries.
Table 130 SWITCHING > Mirroring > RMirror > Destination > Add/Edit
LABEL DESCRIPTION
RMirror VLAN ID Select the RMirror VLAN over which the mirrored traffic is forwarded.
Monitor Port Specify the port to which you copy the traffic in order to examine it in more detail without
interfering with the traffic flow on the original ports.
In Stacking mode, the first box field is the slot ID and the second field is the port number.
Tagging Select whether to add the RMirror VLAN tag to mirrored traffic on the monitor port.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.