ZyXEL Communications XS3800-28, User Manual, Page: 553 / 789

Chapter 74 AAA
XS3800-28 User’s Guide
553
74.5.3.3 Attributes Used by the IEEE 802.1x Authentication
User-Name
NAS-Identifier
NAS-IP-Address
NAS-Port
NAS-Port-Type
–
This value is set to Ethernet(15) on the Switch.
Calling-Station-Id
Frame-MTU
EAP-Message
State
Message-Authenticator
74.5.4 Attributes Used for Accounting
The following sections list the attributes sent from the Switch to the RADIUS server when performing
authentication.
74.5.4.1 Attributes Used for Accounting System Events
NAS-IP-Address
NAS-Identifier
Acct-Status-Type
Acct-Session-ID
– The format of Acct-Session-Id is date+time+8-digit sequential number , for example,
2007041917210300000001. (date: 2007/04/19, time: 17:21:03, serial number: 00000001)
Acct-Delay-Time
74.5.4.2 Attributes Used for Accounting Exec Events
The attributes are listed in the following table along with the time that they are sent (the difference
between Console and Telnet/SSH Exec events is that the Telnet/SSH events utilize the Calling-Station-Id
attribute):
Table 296 RADIUS Attributes – Exec Events through Console
ATTRIBUTE START INTERIM-UPDATE STOP
User-Name
  
NAS-Identifier
  
NAS-IP-Address
  
Service-Type
  
Acct-Status-Type
  
Acct-Delay-Time
  
Acct-Session-Id
  
Acct-Authentic
  