ZyXEL Communications XS3800-28, User Manual, Page: 212 / 789

Chapter 30 Time Range
XS3800-28 User’s Guide
212
C
HAPTER
30
Time Range
30.1 Time Range Overview
You can set a time range for time-oriented features such as Classifier ACL (Access Control List) rule
which categorizes data packets into different network traffic flow. The advantage of the time range
feature is that it allows you to schedule the active time of configurations.
The time range can be configured in two ways – Absolute and Periodic. Absolute is a fixed time range
with a start and end time. Periodic is recurrence of a time range and does not have an end time.
30.1.1 What You Can Do
Use the Time Range screen ( Section 30.2 on page 212 ) to view or define a schedule on the Switch.
30.2 Configuring Time Range
Click SYSTEM > Time Range in the navigation panel to display the screen as shown.
Figure 143 SYSTEM > Time Range
The following table describes the labels in this screen.
Table 89 SYSTEM > Time Range
LABEL DESCRIPTION
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Index This field displays the index number of the rule.
Name This field displays the descriptive name for this rule. This is for identification purpose only. You can
enter up to 32 printable ASCII characters except [ ? ], [ | ], [ ' ], [ " ] or [ , ].