ZyXEL Communications XS3800-28, User Manual, Page: 276 / 789

Chapter 38 ZULD
XS3800-28 User’s Guide
276
38.3 ZULD Setup
Use this screen to enable ZULD on a port, configure a mode and set the probe time. To open this screen,
click
PORT > ZULD > ZULD Setup .
Figure 192 PORT > ZULD > ZULD Setup (Standalone Mode)
Remote MAC Addr This is the MAC address of the port on the connected device to which the port of the
Switch is connected.
Remote Port This is the port number of the port on the connected device to which the port of the Switch
is connected.
Table 119 PORT > ZULD > ZULD Status (continued)
LABEL DESCRIPTION