ZyXEL Communications XS3800-28, User Manual, Page: 421 / 789

Chapter 57 VLAN
XS3800-28 User’s Guide
421
Figure 316 SWITCHING > VLAN > VLAN Setup > Static VLAN > Add/Edit (Stacking Mode)
The following table describes the related labels in this screen.
Table 203 SWITCHING > VLAN > VLAN Setup > Static VLAN > Add/Edit
LABEL DESCRIPTION
Active Enable the switch button to activate the VLAN settings.
Name Enter a descriptive name for the VLAN group for identification purposes. This name consists of up
to 64 printable ASCII characters. The string should not contain [ ? ], [ | ], [ ' ], [ " ] or [ , ].
VLAN Group ID Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.
Note: Do NOT add a VLAN ID that has been used in the SWITCHING > VLAN > Voice
VLAN Setup .
VLAN Type Select Normal (static) or Private . For Private VLANs, select Primary , Isolated or Community .
Association
VLAN List Primary private VLANs can associate with several (secondary) Community private VLANs and up
to one (secondary) Isolated private VLAN.
You only configure VLAN Association List for Primary private VLANs. Use a dash to associate
consecutive VLANs and a comma (no spaces) to associate non-consecutive VLANs. For
example, 51–53 includes 51, 52 and 53, but 51,53 does not include 52.
Secondary private VLANs can only be associated with one primary private VLAN.
SLOT This field appears only in Stacking mode. Click the drop-down list to choose the slot number of
the Switch in a stack.
Port The port number identifies the port you are configuring. In Stacking mode, the first number
represents the slot ID and the second one is the port number. Please note that the default
stacking ports (the last four ports of your Switch) cannot be configured. They are reserved for
stacking only.