ZyXEL Communications XS3800-28, User Manual, Page: 253 / 789

Chapter 35 Link Layer Discovery Protocol (LLDP)
XS3800-28 User’s Guide
253
Figure 173 PORT > LLDP > LLDP MED > LLDP-MED Setup (Standalone Mode)
Figure 174 PORT > LLDP > LLDP MED > LLDP-MED Setup (Stacking Mode)
The following table describes the labels in this screen.
Table 109 PORT > LLDP > LLDP > LLDP-MED Setup
LABEL DESCRIPTION
SLOT This field appears only in Stacking mode. Click the drop-down list to choose the slot number
of the Switch in a stack.
Port This field displays the port number. In stacking mode, the first number represents the slot ID
and the second is the port number. Please note that the default stacking ports (the last four
ports of your Switch) cannot be configured. They are reserved for stacking only.
* Use this row to make the setting the same for all ports. Use this row first and then make
adjustments to each port if necessary.
Changes in this row are copied to all the ports as soon as you make them.