ZyXEL Communications XS3800-28, User Manual, Page: 340 / 789

Chapter 46 NLB
XS3800-28 User’s Guide
340
Figure 253 SWITCHING > NLB > IP Configuration
The following table describes the labels in this screen.
46.2.1 Add/Edit NLB IP-MAC Mapping
Use this screen to map the IP address to the MAC address of a cluster for layer-3 forwarding. You should
use the MAC address added in the
SWITCHING > NLB > MAC Forwarding screen.
Click Add/Edit in the SWTICHING > NLB > IP Configuration screen to display this screen.
Figure 254 SWITCHING > NLB > IP Configuration > Add/Edit
The following table describes the labels in this screen.
Table 155 SWITCHING > NLB > IP Configuration
LABEL DESCRIPTION
Index This field displays the index number of the rule.
Name This field displays the descriptive name of the rule.
IP Address This field displays the IP address of the cluster.
MAC Address This field displays the multicast or unicast MAC address of this rule.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Add/Edit Click Add/Edit to add a new IP-MAC mapping or edit a selected one.
Delete Click Delete to remove the selected IP-MAC mappings.
Table 156 SWITCHING > NLB > IP Configuration> Add/Edit
LABEL DESCRIPTION
Name Enter a descriptive name for identification purposes for this rule. You can enter up to 32
printable ASCII characters except [ ? ], [ | ], [ ' ], [ " ] or [ , ].
IP Address Enter an IPv4 or IPv6 address for a cluster.