ZyXEL Communications XS3800-28, User Manual, Page: 74 / 789

Chapter 4 Web Configurator
XS3800-28 User’s Guide
74
4.5 Web Configurator Layout
The DASHBOARD screen is the first screen that displays when you access the Web Configurator.
The following figure shows the navigating components of a Web Configurator screen.
VID This field displays the VLAN ID.
IP Address This field displays the Switches’ IP address for it to be managed over the network.
IP Subnet Mask This field displays the subnet mask that specifies the network number portion of an IP
address.
Default Gateway This field displays the IP address of the default outgoing gateway in dotted decimal
notation, for example 192.168.1.254.
DNS Server This field displays the DNS (Domain Name System) for mapping a domain name to its
corresponding IP address and so forth.
Change administrator's password and activate SNMP
New Password This field displays asterisks when a new password has been created.
SNMP This field displays whether the Switch acts as an SNMP agent.
Version This field displays the SNMP version for the Switch.
Get Community This field displays the Get Community string.
Set Community This field displays the Set Community string.
Trap Community This field displays the Trap Community string.
Networked AV – Advanced Settings
Networked AV
VLAN
This field displays the VLAN ID for the AVoIP network.
Networked AV
VLAN IP
This field displays the corresponding VLAN ID’s IP address for the AVoIP network.
IGMP Snooping This field displays Active when IGMP Snooping is enabled to forward group multicast traffic
only to ports that are members of that group.
Otherwise, it displays Inactive .
IGMP Snooping
Querier
This field displays Active when the Switch is allowed to send IGMP General Query messages
to the VLANs with the multicast hosts attached.
Otherwise, it displays Inactive .
Unknown
Multicast Frame
This field displays the action to perform when the Switch receives an unknown multicast
frame. It displays
Drop when the frames are discarded. It displays Flooding when the frames
are sent to all ports.
Transmitter/
Receiver
Connected Port
This field shows the Switches’ port numbers for connection to networked audio and video
equipment.
Inter-switch
Connected Port
(Link
Aggregation)
This field shows the Switches’ port numbers for connection to another switch.
Previous Click Previous to show the previous screen.
Finish Review the information and click Finish to create the task.
Cancel Click Cancel to exit this screen without saving.
Table 17 Wizard > Advanced Settings > Step 4 Summary (continued)
LABEL DESCRIPTION