ZyXEL Communications XS3800-28, User Manual, Page: 137 / 789

Chapter 16 Routing Table
XS3800-28 User’s Guide
137
16.3 IPv6 Routing Table
Use this screen to view IPv6 routing table information. Click MONITOR > Routing Table > IPv6 Routing
Table in the navigation panel to display the screen as shown.
Figure 89 MONITOR > Routing Table > IPv6 Routing Table
The following table describes the labels in this screen.
Metric This field displays the cost of the route.
Type This field displays the method used to learn the route.
STATIC – added as a static entry.
LOCAL – added as a local interface entry.
RIP – added as a RIP entry.
OSPF – added as an OSPF entry.
LOOPBACK – added as a loopback interface entry.
Uptime This field displays how long the route has been running since the Switch learned the route and
added an entry in the routing table.
Table 35 MONITOR > Routing Table > IPv4 Routing Table (continued)
LABEL DESCRIPTION
Table 36 MONITOR > Routing Table > IPv6 Routing Table
LABEL DESCRIPTION
Index This field displays the index number.
Route
Destination/
Prefix Length This field displays the IPv6 subnet prefix and prefix length of the final destination.
Next Hop This field displays the IPv6 address of the gateway that helps forward the packet to the
destination.
Interface This field displays the descriptive name of the IPv6 interface that is used to forward the packets to
the destination.
Metric This field displays the cost of the route.
Type This field displays the method used to learn the route.
STATIC – added as a static entry.
Connect – added as a local interface entry.