ZyXEL Communications XS3800-28, User Manual, Page: 610 / 789

Chapter 83 DHCP Snooping
XS3800-28 User’s Guide
610
To open this screen, click SECURITY > IPv4 Source Guard > DHCP Snooping > DHCP Snp. Status .
Figure 480 SECURITY > IPv4 Source Guard > DHCP Snooping > DHCP Snp. Status
The following table describes the labels in this screen.
Table 326 SECURITY > IPv4 Source Guard > DHCP Snooping > DHCP Snp. Status
LABEL DESCRIPTION
Database Status
This section displays the current settings for the DHCP snooping database. You can configure them in the SECURITY
> IPv4 Source Guard > DHCP Snooping > DHCP Snp. Setup screen.
Agent URL This field displays the location of the DHCP snooping database.
Write Delay
Timer
This field displays how long (in seconds) the Switch tries to complete a specific update in the
DHCP snooping database before it gives up.
Abort Timer This field displays how long (in seconds) the Switch waits to update the DHCP snooping
database after the current bindings change.
Agent Running This field displays the status of the current update or access of the DHCP snooping
database.
None : The Switch is not accessing the DHCP snooping database.
Read : The Switch is loading dynamic bindings from the DHCP snooping database.
Write : The Switch is updating the DHCP snooping database.
Delay Timer
Expiry
This field displays how much longer (in seconds) the Switch tries to complete the current
update before it gives up. It displays
Not Running if the Switch is not updating the DHCP
snooping database right now.
Abort Timer
Expiry
This field displays when (in seconds) the Switch is going to update the DHCP snooping
database again. It displays
Not Running if the current bindings have not changed since the
last update.
Last Succeeded
Time
This field displays the last time the Switch updated the DHCP snooping database
successfully.